Logwashers

The Powerscreen® Powerscrub range takes washing one step further by providing high speed scrubbing of heavily contaminated material to produce cleaner material at a faster rate.

Powerscrub Range

The Powerscreen® Powerscrub range takes washing one step further by providing high speed scrubbing of heavily contaminated material to produce cleaner material at a faster rate. The Powerscrub range is designed with a trough and two axles with interchangeable blades and paddles which intensively mix the material. Friction from this process breaks down feed contaminates and allows scrubbed material to be stockpiled.

Its readily portable format makes it particularly suitable for green-field applications / contractor use / temporary planning permission sites but operators more used to static installations will still appreciate the small footprint and minimal site preparations required. In all cases installation time is significantly less than conventional builds thanks to the high level of factory pre-fitting and connections.

The no-compromise design ethos adapted ensures maximum serviceability and performance despite the highly integrated and compact nature of the system with numerous innovative features including easily removed pumps, ready access to screening media and intuitive controls. The range includes numerous modular configurations but all are based around the choice of a 16×5’ or 20×6’ washing screen and a choice of sand output capacities.

Features & Benefits:

  • Output potential up to 200 tph (220 US tph)
  • Heavy duty robust construction
  • 2 high output electrical motors power the inclined rotating shafts to rigorously scrub the material
  • Material bed in the hull prevents wear in the steel trough
  • Low water consumption
  • Remote greasing to all bearings
  • Interchangeable high tensile blades
  • Water flushed lower bearings prevent wear or damage from small particles
  • Elevated spray bar, constantly add’s water to the material
  • Agitation encourages light particles, slits and clays to float through the water exit
  • Rubber lined input chute
  • Safety flow-forge panels over shafts
  • Lifting points attached to sides of hull for carriage

Options:

  • Galvanised structure
  • Modular mat fitted to discharge chute with two spray bars and catchbox
  • Static or mobile
  • Walkways on either side
  • Polyurethane screen and catch box at discharge end
  • Sieve mesh fitted in water outlet boxes
  • Electrical control panel
  • 6m (20″) discharge conveyor

Powerscrub R Range

The Powerscreen® Powerscrub R (Recycling) range is specifically designed to wash construction and demolition waste, separating contaminates from saleable material. The range is designed with a trough and two axles with blades and paddles which intensively mix the feed material. Friction from this process breaks down contaminates and allows scrubbed material to be discharged for stockpiling. Water used in the process is recirculated to a water treatment facility.

Features & Benefits:

  • Output potential up to 120 tph (132 US tph)
  • Designed to work in recycling applications to separate contaminates from saleable material
  • Versatility and design enables it to be adapted to gravel applications
  • Rounded hull to reduce material build up in the trough
  • Low water consumption
  • Remote greasing to all bearings
  • Heavy-duty robust construction
  • High tensile blades and paddles
  • Lower bearings are freshwater flushed to prevent wear or damage
  • Elevated spraybar’s wash the material and allow for discharge of smaller particles
  • Built in agitation system allows for further small particle discharge
  • Large inlet chute with bolt in wear plates
  • Rubber lined catchboxes and outlet chutes
  • 4 lifting points on the hull for carriage

Options:

  • Galvanised structure
  • Handrails on top of Powerscrub (3 sides) opposite side walkway
  • Steel support with walkway, galvanised handrails, flowforge and access steps (single side walkway
  • Walkway around back of trash screen
  • 8′ x 4′ (2.4m x 1.2m) liner vibration part rinser screen with 5mm polyurethane modular deck
  • 6′ x 2′ (1.8m x 0.6m) liner vibration dewatering screen with polyurethane modular decks

PowerX Equipment is committed to providing the highest level of customer service.

It’s easy to get in touch with us, simply fill in your details in the enquiry form below and hit submit.

We look forward to assisting you.